Sankey D Keg Coupler and Sankey to Ball Lock Keg Coupler Adapter 1 Pair, 5/8 Thread Gas & Liquid Quick Disconnect Adapter Stainless Steel Keg Coupler Ball Lock Conversion Posts for A,D,S,G Type Kegs

Keg Coupler Ball Lock Conversion Kit Includes: 1* Sankey Keg Coupler D Type with 2 hose clamps 1* Gas Post (with groove) 1* Liquid Post (no groove) 2* Small Pre-installed Silicone O-rings 2* Thickened Pre-installed Leakproof Washers Specifications of Sankey Coupler Adapter: Material: Stainless Steel + Silicone Thread Size: 5/8'' FPT Compatibility: Fits Sankey Type D, A, S, G Keg Couplers Key Features & Benefits: Instant Conversion: The core purpose of this kit is to allow for rapid switching between commercial sankey kegs and homebrew ball lock kegs. Integrate any beer into your kegerator setup without needing a separate dispensing system for each keg type. Foolproof Identification: We've included a subtle etched line on the gas post, making it easy to distinguish from the smooth liquid post. This prevents accidental line mix-ups during setup. Simple Operation: Installation is a breeze. Just unscrew the existing barbed fittings from your Sankey coupler and screw these posts in their place. Once installed, you can attach your standard ball lock disconnects (black for liquid, gray for gas) just like you would on a Cornelius keg. How to Use Coupler Posts: 1. Ensure your Sankey keg coupler is closed and removed from the keg. 2. Remove the two existing barbed fittings (for the liquid and gas lines) from the coupler. 3. Screw the gas post (with groove) and liquid post (no groove) onto the corresponding 5/8" FPT ports on the coupler. Hand-tighten firmly, and if needed, use a wrench for a final quarter-turn. Do not over-tighten, as this can damage the O-rings and cause leaks. 4. Attach your ball lock quick disconnects to the new posts. You are now ready to tap and serve! For cleaning, simply run cleaning solution or clear water through the system. Please do not take the adapters apart, it is hard to reassembly.

• Instant Conversion: sankey to ball lock keg coupler adapter can instantly switch between commercial sankey kegs and your homebrew ball lock cornelius kegs in seconds. Once installed, you can attach your standard ball lock disconnects (black for liquid, gray for gas) just like you would on a Cornelius keg.
• Leak-Proof Design: The precision-machined keg coupler posts, combined with high-quality, thick silicone washers, create a airtight and leak-proof seal with your Sankey coupler. This preserves carbonation and ensures your beer pours perfectly every time.
• Universal Compatibility: 5/8FPT Thread ball lock conversion kit are designed to fit the most common Sankey D System couplers (also compatible with A, S, and G types), making it the ideal adapter for home kegerators, nano-breweries, and bars.
• Easy to Identify & Install: The gas post features a subtle etched groove, while the liquid post is smooth. Just unscrew the existing barbed fittings from your Sankey coupler and screw these 5/8" thread gas & liquid quick disconnects posts in their place.
• Quality You Can Trust: Made from corrosion-resistant 304 stainless steel, these adapters are built to last, are easy to clean, and will not impart any flavors to your beer.