Night Sky Glaze Sample

“Night Sky” is a specialty multi-step finish created using layered glazes. To achieve this effect, I apply two coats of black glaze, then carefully wipe the high points with a damp sponge to allow the white clay to show through. I touch up the black glaze as needed before applying two coats of clear glaze, taking care not to disturb the surface.

Because this process requires significantly more time and attention than my standard glazing method, Night Sky carries an additional charge:

• +$2 for 2×2 feature tiles
• +$3 for 3×3 feature tiles
• +$4 for 4×4 and 3x6 feature tiles
• +$6 for 6×6 and 4×8 feature tiles

Below are some of the steps in the glazing process I use for "Night Sky."

The photographs above were featured in Handmade Tiles: Creative Techniques by Marion Brandis.